Fall Protection Equipment in Saudi Arabia — Harnesses & Safety Lines | RAF Safety

Showing all 3 results

Fall Protection Equipment in Saudi Arabia — Work Safely at Height

Falls from height are the leading cause of fatality on construction sites globally — and Saudi Arabia’s fast-growing construction sector is no exception. Any worker operating above 1.8 metres must be protected by certified fall protection equipment under Saudi workplace safety regulations.

RAF Safety supplies fall protection equipment to construction contractors, EPC firms, and industrial operators across KSA — available wholesale and retail from our branches in Riyadh, Al Jubail, Jeddah, and Al Khamees Mushait.

Our Fall Protection Range

1. Full-Body Safety Harnesses

The core component of any fall arrest system — distributing arrest forces safely across chest, shoulders, thighs, and pelvis.

2. Safety Lanyards

Connect the harness to an anchor point to arrest a fall before impact

3. Anchor Points & Slings

Rated fall arrest anchors (minimum 15kN per EN795) — the foundation of every safe work-at-height system.

Fall Protection Regulations in Saudi Arabia

Saudi workplace safety regulations require:

  • Fall protection for any work at or above 1.8 metres from a lower level
  • All fall arrest equipment inspected before each use and formally annually
  • Harnesses, lanyards, and anchors must carry EN or equivalent certifications
  • Workers must be trained in correct use, inspection, and limitations

FAQs — Fall Protection KSA

Yes. Regulations require fall protection at 1.8 metres and above. Aramco and SABIC projects typically enforce stricter internal requirements regardless of height.

Fall restraint prevents reaching the fall hazard. Fall arrest allows reaching the edge but stops the fall before impact. For most KSA construction work, a full-body harness + shock-absorbing lanyard + rated anchor is required.

Scroll to Top